Loading ...
Loading ...
Loading ...
5-18 ENGINE TOP END
Cylinder Head Cover
•
Replace the head cover gasket with a new one.
•
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
•
Apply liquid gasket [A] to the cylinder head cover [B] as
shown.
Sealant - Liquid Gasket, TB1211F: 92104-0004
•
Install the gasket to the cylinder head cover.
•
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
•
Apply liquid gasket [A] to the cylinder head cover [B] as
shown.
Sealant - Liquid Gasket, TB1211F: 92104-0004
•
Replace the washers with new ones.
•
Install the washers with the metal side [A] faces upward.
•
Tighten the cylinder head cover bolts following the speci-
fied tightening sequence [1 ∼ 6].
Torque - Cylinder Head Cover Bolts: 10 N·m (1.0 kgf·m, 89
in·lb)
•
Install:
Bracket
•
Tighten the bracket bolt.
•
Install the removed parts (see appropriate chapters).
Loading ...
Loading ...
Loading ...