Loading ...
Loading ...
Loading ...
SUSPENSION 13-31
Tie-Rod, Rocker Arm
Tie-Rod Removal
•
Remove:
Mud Guard (see Mud Guard Removal in the Frame
chapter)
•
Squeeze the brake lever slowly and hold it with a band
[A].
•
Raise the rear wheel off the ground with the jack (see
Rear Shock Absorber Removal).
Special Tools - Jack: 57001-1238
Jack Attachment: 57001-1608
WARNING
When raising the rear wheel off the ground with the
jack and removing part(s) from the motorcycle, be
sure to hold the front brake, or the motorcycle may
fall over. It could cause an accident and injury.
•
Remove:
Upper Tie-Rod Bolt and Nut [A]
Lower Tie-Rod Bolt and Nut [B]
Tie-Rod [C]
Tie-Rod Installation
•
Apply grease to the inside of the grease seals.
•
Install the tie-rod.
•
Replace the tie-rod nuts with new ones.
•
Tighten:
Torque - Tie-Rod Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb)
•
Install the removed parts (see appropriate chapters).
Rocker Arm Removal
•
Remove:
Mud Guard (see Mud Guard Removal in the Frame
chapter)
•
Squeeze the brake lever slowly and hold it with a band
[A].
Loading ...
Loading ...
Loading ...