Loading ...
Loading ...
Loading ...
CHANGING VOLTAGE
See Figures2-4.
Your radial saw has been set up at the factoryto
operateefficientlyon a 120V AC singlevoltagecircuit.
However, if heavyduty operationisrequired,the
circuitsare overloaded,or the circuitis lowvoltage,
have a qualifiedelectdcianchangethe voltageonthe
main power systemtoa 240V AC voltagecircuit.
_l, WARNING: The controlcutdevice isset up for
a 120V AC singlevoltagecircuit.Do not modify
the control cut cord. Identifythe controlcut
cord and tie itbackout ofthe way.
• Correctlyidentifythe controlcutcord, unplugit,
and set itaside.
• Unplugthe main powercord.
• Remove the blade following the procedureinthe
Assemblysection.
• Remove the pan head screwabove theblade
arbor on the motorcover. Liftmotorcoverto
expose switch.See Figure2.
• Use a small screwdriverto slidethe dualvoltage
switchto the 240V position.See Figures3 and 4.
• Reinstallmotorcover.
• Replace the 120V plugon the main cordwith a UL
listed240V, 15 amp, 3-prongplug.
• Followthe instructionsprovidedwiththe UL listed
plug.
• Plugthe cordintoa 240V, 15 amp, 3-blade recep-
tacle. Make sure the receptacleisconnected to a
240V AC powersupplythrougha 240V'bmnch
circuitthat hasa 15 ampfuse orcircuitbreaker.
Note: No adapter isavailable for thistype of plugor
receptacle.
PANHEADSCREW
M_ORC_ER
LIFTMOTORCOVERTOEXPOSESWITCH
SUDEASSHOWNFORSINGLEVOLTAGECIRCUITS
SWITCHSHOWNIN110-120VOLTPosmoN
Fig. 3
LIFTMOTORCOVERTOEXPOSESWITCH
SLIDEASSHOWNFORDUN.VOLTAGECIRCUITS
SWITCHSHOWNIN220-240VOLTPOSmON
Fig. 4
0
BLADEARBOR Fig. 2
9 CnFT|NIIN"RADIALSAW315.220380
Loading ...
Loading ...
Loading ...