Loading ...
Loading ...
Loading ...
• GUARD AGAINST KICKBACK, Kickbackcan
occurwhen the bladestalls,drivingthe work piece
backtoward theoperator. It can causeyourhand
tocontact theblade, resultingin seriouspersonal
injury.Stay outof the blade pathand turnswitch
offimmediatelyit bladebinds or stalls.
• DO NOT USE A PERSON AS A SUBSTITUTE
FOR A TABLE ifadditional supportisneeded. Use
a supportthe same heightas thetable.
• USE A SUPPORT FOR THE SIDES AND BACK
OF THE SAW TABLE when sawingwide or long
workpiecesto minimizethe riskofblade pinching
and kickback.Use a sturdy"outrigger" supportto
preventtippingif a table extensionmore than24
incheslongis attached tothe saw.
• CUT ONLY WOOD, PLASTIC OR WOOD-LIKE
MATERIALS. Do notcut metal•
• BEFORE MAKING A CUT, be sure all adjustments
are secure.
I NEVER cut more than one piece at a tnme.DO
NOT STACK more than one workpieceon the saw
table at a time.
l DO NOT REMOVE THE SAW'S BLADE GUARD.
Never operate the saw withthe bladeguard
removed. Make sure all guardsare operating
properlybeforeeach use.
• NEVER PERFORM ANY OPERATION FREE-
HAND. Always place the workpieceto becut on
the saw table and positionitfirmlyagainst the
fence as a backstop.
• USE THE RIP FENCE. Always use a fence or
straightedge guide when ripping.
• BE SURE THE BLADE PATH IS FREE OF
NAILS. Inspectfor and remove all nailsfrom
lumberbefore cutting.
• BE SURE THE BLADE CLEARS THE WORK-
PIECE. Never startthe saw withthe bladetouching
the stock.
• KEEP HANDS AWAY FROM CUTTING AREA.
Do not reach underneathwork or in blade cutting
path with yourhandsand fingers for any reason.
Always turnthe poweroffwhen cut iscomplete.
• USE A PUSHBLOCK OR PUSHSTICK in ripmode
for workpiecesso smallthat yourfingersgo under
the bladeguard. NEVER TOUCH BLADE or other
movingpartsduring use, for any reason.
l
ALLOW THE MOTOR TO COME UP TO FULL
SPEED beforestartinga cutto avoid bladebinding
or stalling.
ALWAYS PUSH THE WORKPIECE when ripping;
never pullittowardthe saw.
DO NOT FEED THE MATERIAL TOO QUICKLY.
Do notforce the workpieceagainsttheblade.
ALWAYS TURN OFF SAW before disconnecting
it, toavoidaccidentalstartingwhen reconnecting
to thepowersupply.NEVER leave the saw
unattendedwhile connectedto a powersource.
• BEFORE CHANGING THE SETUP, REMOVING
COVERS, GUARDS, OR BLADE; unplugthe saw
and removethe switchkey.
• KEEP TOOL DRY, CLEAN, AND FREE FROM
OIL AND GREASE. Always usea clean cloth
when cleaning. Never usebrake fluids,gasoline,
petroleum-basedproducts,or anysolventsto
clean tool.
• KEEP BLADES CLEAN, SHARP AND WITH
SUFFICIENT SET. Sharpbladesminimizestalling
and kickback•Keep bladesfree of rust,grease,
and pitch.
_i, WARNING: Blade coastsafterbeingturnedoff.
USE ONLY OUTDOOR EXTENSION CORDS.
Use onlyextensioncordswiththe marking"Ac-
ceptablefor use withoutdoorappliances; store
indoorswhile notin use,"Use extensioncordswith
an electricalratingnot lessthan thesaw's rating.
Alwaysdisconnectthe extensioncordfromthe
outletbeforedisconnectingthe productfromthe
extensioncord.
INSPECT TOOL CORDS AND EXTENSION
CORDS PERIODICALLY and, ifdamaged, have
repairedbya qualifiedservicetechnicianat a
Sears repaircenter. Stay constantly aware ofcord
locationand keep it wellaway fromthe moving
blade.
DO NOT ABUSE CORD. Never yankthecordto
disconnectitfrom receptacle.Keep the cordfrom
heat, oil, and sharpedges.
SAVE THESE INSTRUCTIONS. Refer to them
frequently and use to instruct other users. If you
loan someone this tool, loan them these instruc-
tionsalso.
SAVE THESEINSTRUCTIONS
IHF{'INAr RADIALSAW315.220380 6
Loading ...
Loading ...
Loading ...