Loading ...
Loading ...
Loading ...
n USE THE PROPER EXTENSION CORD. Make
sureyour extensioncordisin good condition,Use
onlya cord heavyenoughto carrythe currentyour
productwilldraw.An undersizedcordwillcause a
dropin linevoltage resultingin loss ofpowerand
overheating.A wiregage size (A.W.G.) of at least
14 is recommendedfor an extensioncord25 feet
or lessin length.If in doubt,use the nextheavier
gage. The smallerthe gage number,the heavier
thecord.
M AVOID ACCIDENTAL STARTING. Be sure switch
is offwhen pluggingin the tool.
• REMOVE WRENCHES AND ADJUSTING KEYS.
Get in the habitof checking- beforeturningon the
tool- thathex keys and adjustingwrenchesare
removedfrom tool.
DISCONNECT ALL TOOLS. When not in use,
beforeservicing,orwhen changingattachments,
blades, bits,cutters,etc., all toolsshouldbe
disconnectedfrom the power supply.
• DO NOT FORCE THE TOOL. It willdo thejob
better and more safelyat the rate for whichit was
designed.
• BEFORE MOUNTING, DISCONNECTING OR
REMOUNTING THE MOTOR; unplugthe saw and
removethe switchkey.
_IL WARNING: When servicing,use onlyidentical
Craftsmanreplacementparts.Use of anyother
partsmay create a hazard or damage product.
• CHECK DAMAGED PARTS. Beforeusingthe tool
again, check any damaged parts,includingguards,
for properoperationand performance.Check •
alignmentof movingparts,bindingof movingparts,,
breakage of parts, saw stability,mounting,and any
other conditions thatmay affect itsoperation.A
damaged part mustbe propedyrepairedor re- •
placed bya qualifiedservicetechnicianat a Sears
repaircenter to avoidriskof personalinjury.
USE ONLY CORRECT BLADES. Use the right
blade stylefor thematerial and the type of cut.
Use onlyblades markedfor at least5,000 rpmand
10 in. or smaller,with e 5/8 in.arbor hole.
• KEEP GUARDS IN PLACE and Ingood working
order.This includesthe blade guard,the dving
knife, and the anti-kickback pawls.
• CHECK DIRECTION OF FEED. When dpping,
feed work into a bladeor cutteragainstthe direc-
tionof rotation ofthe bladeor cutter.
• NEVER LEAVE TOOL RUNNING UNAI"rENDED.
TURN THE POWER OFF. Do not leavethe tool
untilitcomes to a completestop.
• USE RECOMMENDED ACCESSORIES. Using
improperaccessories may riskinjury.Consultthe
Accessoriessection for recommendedaccesso-
des.
M USE ONLY SEARS REPLACEMENT PARTS. All
repairs,whether electricalor mechanical,should
be made bya qualifiedservicetechnicianat a
Sears repaircenter.
NEVER USE THIS TOOL IN AN EXPLOSIVE
ATMOSPHERE. Normal sparkingofthe motor
could ignitefumes.
MAKE SURE THE WORK AREA HAS AMPLE
LIGHTING to see the workand that no obstruc-
tionswillinterferewithsafe operation BEFORE
performingany work usingthis tool.
DO NOT USE TOOL IF SWITCH DOES NOT
TURN IT ON AND OFF. Have defective switches
replaced bya qualified servicetechnicianat a
Sears repaircenter.
• GUARD AGAINST ELECTRICAL SHOCK by
preventingbodycontactwith groundedsurfaces
suchas pipes,radiators,ranges, refrigerator
enclosures.
M GROUND ALL TOOLS. See Electricalpage.
• WEAR A DUST MASK to keep frominhalingfine
particles.Use wooddustcollectionsystems
wheneverpossible.
m PROTECT YOUR HEARING. Wear headng
protectionduringextended periodsofoperation.
• DO NOT OPERATE THIS TOOL WHILE UNDER
THE INFLUENCE OF DRUGS, ALCOHOL, OR
ANY MEDICATION.
STAY ALERT AND EXERCISE CONTROL. Watch
what youare doingand use commonsense. Do
not operate tool when you are fired. Do not
rush.
AVOID AWKWARD OPERATIONS AND HAND
POSITIONS where a sudden slipcould cause your
handto move intothe blade. ALWAYS make sure
you havegood balance.
5 CRRFTSNRrRADfALSAW315._80
Loading ...
Loading ...
Loading ...