Loading ...
Loading ...
Loading ...
PROBLEM CAUSE SOLUTION
Miter or crosscutsare nottrue, 1. Scale pointeris notcorrect. 1. Resetthe pointerat the top
rear ofarm.
2. Columnisout ofalignment. 2. See Adjustingthe Column
Tubein Assemblysection.
3. Carriage ismisaligned. 3. See Setting the Arm Lock
Wheel in the Assembly section.
4. Yoke is looseon carriage. 4. See Settingthe YokeClamp
procedurein Assemblysection.
5. Armis outof alignment. 5. See AligningArm for Cross
Cuts inAdjustmentssection.
6. Sawdust hascollected between
tables.
,t
7. Table top is notparallel to the
arm.
6. Remove and clean tables.
7. See Leveling TableSupports
and Leveling the Front Tablein
the Assemblysection.
8. Fence/tablesare not straight. 8. Check with square;sandor
replace.
Wood edges away from fence
when ripping.
1. Blade isnot para!lel withfence. 1. See Squaring theBlade tothe
Fence procedurein the Adjust-
mentssection.
2. Arm is notperpendicularto
fence.
2. See AligningtheArm for Cross
Cutsprocedurein the Adjust-
mentssection.
3. Rivingknife needs adjustment.
3. See Aligning theRivingKnife to
the Bladeprocedureinthe
Adjustmentssection,
Depthof cutvaries from one end
ofwoodto the other.
1. Table is not parallel to arm.
1. See Leveling Table Supports
and Leveling the Front Table in
the Assembly section.
2. Columntube is loosein column 2. See AdjustingtheColumn
support. TubeinAssemblysection.
3. Arm is loose or misaligned.
3. See Setting the Arm Lock
Wheel in the Assembly section.
Riving knife strikeswoodduring a
cut.
1. Riving knife not aligned with 1. See Aligningthe Riving Knife to
blade, the Blade procedure in the
Adjustments section.
rlIRFTSNRIr RADIALSAW315.220380 58
Loading ...
Loading ...
Loading ...