Loading ...
Loading ...
Loading ...
SETTINGTHE REVEL LOCK LEVER
See Figures 18A-18C,
The bevel lock lever locksthe blade at desired angles
otherthan the preset positivestop angles.The bevel
lock lever ispreset at the factorybut may need
readjustmentafter shippingor extended use. Check
for overtightnessor loosenessand make any neces-
sary adjustmentsas follows:
The bevel locklever is locatedon the frontof the yoke
assembly, near the bottom.It isattachedto a clamp
boltthat controlsthe amountof tightness.
• Pullthe bevel locklever forwardto unlockit. Use
the bevel indexknob(justunderthe handle)to
rotatethe motorapproximately30".Lockthe bevel
locklever.
• Ifthe bevel locklever isdifficultto lock,the clamp
boll needsto be loosened,ifthe motorcan be
forcedoutof position,theclamp boltneeds to be
tightened.
• Remove the socketscrew(underthe bevellock
lever) and starwasher witha 1/8 in.hexkey.
• Use the bevel lockhandle as a wrenchto tightenor
loosenthe clamp bolt.The clamp belt has a right-
handedthread. Tightenitleftto right.
• When the boltiscorrectlyset, removethe bevel
locklever fromthe clampboil and place itroughly
paralleltotheyoke assembly.
• Replacethesocketscrewand starwasher, Re-
checkthe tightnessofthe bevellocklever. Repeat
the stepsabove untilthe motorissecure when
locked,and thebevel locklever fitssquarely
againstthe yokeassembly.
STARWASHER
SOCKETSCREW'_'_
I
1/8In.HEXKEym----_
BEVEL
LOCKLEVER
Fig. 18B
BEVEL BEVEL
LOCKLEVER INDEXKNOB MOTOR Fig. 18A
BEVELLOCKLEVERIN
CORRECTLOCKEDPOSITION
Fig, 18C
27 (RIIFT_[NAN"RADIALSAW315,220380
Loading ...
Loading ...
Loading ...