Loading ...
Loading ...
Loading ...
MOUNTING SAW TO LEG STAND
See Figure 11.
,_ WARNING: Firmlyboltthe saw tothe leg stand
to keep the saw from tipping,walking,or sliding.
• Locatethefollowinghardwarefroma smallhard-
ware bag:
4 hexboils (5/16-18 x 5/8 in.)
4 Iockwashers(5/16 in.)
8 flatwashers (11/32 in.)
4 hex nuts(5/16-18)
• Place the saw on top ofthe legstand sothe holes
in the saw base lineup withthe holeson top ofthe
leg standbraces.
• Puta washer on a screw,and put thescrewand
washer intothe holein thesaw base. Cap with
another washer,then a Iockwasherand a hex nut.
Hand tightenthe set.
• Installthe otherthree setsand securelytightenall ,
foursets witha 1/2 in.wrench.
An'ACHING ELEVATING HANDWHEEL
See Figure 12.
_1= WARNING: Be surethe main powercordof
yoursaw is unplugged.Ignodngthisprecaution
could resultin seriousinjury.Do not performthe
followingstepsunlessthe saw is unplugged.
The elevating handwheeladjuststhe heightofthe
radialarm and the blade.
• Take the handwheel,starwasher,and screw
(10-24 x 5/8 in.Soc. Hd.) from the hardwarebag.
• Placethe bandwheel on the end oftheelevating
shaft,whichextendsfromthe front ofthe saw base.
• Placethe starwasher on thescrewand thread
screwintothe end ofthe shaft.
• Securelytightenthe screwwitha 5/32 in.hex key.
• Raiseor lowerthe armby turningthe handwheel.
ELEVATING
SHAFT
HANDWHEEL
SCREW
SAW
BASE
LEG
_TANO
STARWASHER
SAWBASE
Fig. 12
FLAT
LEGSTAND
HEXNUT
Fig. 11
23 CRRFTJ[MIIWRADIALSAW315,220380
Loading ...
Loading ...
Loading ...