Loading ...
Loading ...
Loading ...
53
CONTENTS
SETTING UP
SEWING
UTILITY
STITCHES
MY CUSTOM
STITCH
TM
(CREATE YOUR OWN
STITCH DESIGNS)
EMBROIDERING
MAINTENANCE
ERROR
MESSAGES
SEWING CHART
PATTERNS
(PROGRAMMED
IN MACHINE)
OVERCASTING
Overcasting
1 for sewing thin and medium weight fabrics
2 for sewing thick fabrics
3 for sewing thick and medium weight stretch
fabrics
4 for sewing mediumweight stretch fabrics
5 for sewing stretch fabrics
6 for sewing stretch fabrics
J
1234 5 6
6
1
5
Attach presser foot G, lower the presser foot lever, and then
sew the overcasting with the fabric edge against the guide of
presser foot G.
1 Guide
Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reinforcement stitches
before sewing. In addition, pressing the reverse/reinforcement
stitch button at the end of the stitching automatically sews
reinforcement stitches, trims the threads and stops the
machine.
CAUTION
After the stitch width is adjusted, turn the balance wheel
toward you by hand and check that the needle does not
touch the presser foot. If the needle hits the presser foot
and breaks, injuries may occur.
Sewing with , or
Attach presser foot J, and check that the needle drops slightly
off the edge of the fabric before sewing.
Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reinforcement stitches
before sewing. In addition, pressing the reverse/reinforcement
stitch button at the end of the stitching automatically sews
reinforcement stitches, trims the threads and stops the
machine.
Sewing with , or
G
G
G
J
Utility stitches that display can be sewn using the side cutter. For details on installing and using the
side cutter, refer to page 16.
Loading ...
Loading ...
Loading ...