Loading ...
Loading ...
Loading ...
18
CONTENTS
SETTING UP
SEWING
UTILITY
STITCHES
MY CUSTOM
STITCH
TM
(CREATE YOUR OWN
STITCH DESIGNS)
EMBROIDERING
MAINTENANCE
ERROR
MESSAGES
SEWING CHART
PATTERNS
(PROGRAMMED
IN MACHINE)
With the accessory compartment removed, the feed dog
position switch can be seen at the base of the machine. To
lower the feed dogs, for example when sewing buttons, slide
the lever to the right. To continue sewing while the feed dogs
feed the fabric, slide the lever to the left.
Note
When the embroidery unit is attached to the sewing machine,
the feed dogs are automatically lowered.
Raising/lowering the feed dogs
Installing the presser foot holder
5
1. Press the needle position button to raise the needle, and
then turn off the sewing machine.
2. Raise the presser foot lever.
3. Remove the currently installed presser foot.
5
4. While pressing the black button on the left side of the
presser foot holder, slide the holder as high as possible up
the presser foot bar, and then release the button.
1 Presser foot holder
CAUTION
Be careful not to touch the tip of the needle, otherwise
injuries may occur.
Note
If the presser foot holder is not installed correctly, the thread
tension may not be tight enough due to an improper presser
foot height.
Loading ...
Loading ...
Loading ...