Loading ...
Loading ...
Loading ...
90 GETTING TO KNOW YOUR VEHICLE
TO LOCK/CLOSE THE LIFTGATE
There are several different ways to close the
liftgate:
Manually by grabbing the liftgate closing
handle and pulling in a downward motion to
close the liftgate.
Key fob
Hands-free (if equipped)
Liftgate close button in the cargo area
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, pushing the Passive Entry
button located to the left of the electronic
liftgate release button, will lock the vehicle only.
If the liftgate is fully open, the liftgate can be
closed by pushing the liftgate close button
located in the cargo area on the left rear trim
panel, near the liftgate opening. If the liftgate is
in motion, pushing the liftgate close button a
second time will reverse the liftgate operation.
Liftgate Close Button
ADJUSTABLE POWER LIFTGATE HEIGHT
The maximum height that the liftgate will open
can be adjusted and saved so that the liftgate
will only open to the desired height. To set a
desired height, proceed as follows:
1. Open the liftgate fully, then manually pull
down on the liftgate to the desired height.
2. Push and hold the liftgate close button,
located on the left side trim panel inside the
cargo area, for three seconds. An audible
chime will be heard to let you know the
height has been saved.
To set the saved height setting to a new setting,
proceed as follows:
1. Open the liftgate, then manually push the
liftgate upward to its full open position.
2. Manually pull the liftgate down to the new
desired height and hold the liftgate close
button for three seconds until the audible
chime is heard.
Power Liftgate Malfunction Procedure:
1. In the event of a power malfunction to the
liftgate, the liftgate can be released by
accessing the service release feature in
the latch. This can be done using a 3 mm
diameter screwdriver.
Liftgate Service Release
21_WL_OM_EN_USC_t.book Page 90
Loading ...
Loading ...
Loading ...