Loading ...
Loading ...
Loading ...
118 GETTING TO KNOW YOUR INSTRUMENT PANEL
(Continued)
Active Lane Management Indicator Light —
If Equipped
When the Active Lane Management
system is ON, but not armed, the
Active Lane Management indicator
light illuminates solid white. This occurs when
only left, right, or neither lane line has been
detected. If a single lane line is detected, the
system is ready to provide only visual warnings
if an unintentional lane departure occurs on the
detected lane line Ú page 174.
Rear Seat Unoccupied Indicator Light —
If Equipped
This light indicates when the rear
passenger seats are unoccupied, and
will illuminate in the upper right portion
of the instrument cluster display, momentarily
replacing the configurable corner information.
Selec-Speed Control Indicator Light —
If Equipped
This light will turn on when
Selec-Speed Control is activated.
To activate Selec-Speed Control, assure the
vehicle is 4WD Low and push the button on the
Instrument Panel.
NOTE:
If the vehicle is not in 4WD Low, “To Enter
Selec-Speed Shift to 4WD Low” will appear in
the instrument cluster display.
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam headlights
are on. With the low beams activated,
push the multifunction lever forward (toward
the front of the vehicle) to turn on the high
beams. Pull the multifunction lever rearward
(toward the rear of the vehicle) to turn off the
high beams. If the high beams are off, pull the
lever toward you for a temporary high beam on,
“flash to pass” scenario.
GRAY INDICATOR LIGHTS
Night Vision Suppressed Indicator Light —
If Equipped
This light alerts the driver that the
Night Vision Warning System status is
Suppressed Ú page 181.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
Onboard Diagnostic system called OBD II. This
system monitors the performance of the
emissions, engine, and transmission control
systems. When these systems are operating
properly, your vehicle will provide excellent
performance and fuel economy, as well as
engine emissions well within current
government regulations.
If any of these systems require service, the
OBD II system will turn on the Malfunction
Indicator Light (MIL). It will also store diagnostic
codes and other information to assist your
service technician in making repairs. Although
your vehicle will usually be driveable and not
need towing, see an authorized dealer for
service as soon as possible.
CAUTION!
Prolonged driving with the MIL on could
cause further damage to the emission
control system. It could also affect fuel
economy and driveability. The vehicle must
be serviced before any emissions tests can
be performed.
21_WL_OM_EN_USC_t.book Page 118
Loading ...
Loading ...
Loading ...