Loading ...
Loading ...
Loading ...
202 STARTING AND OPERATING
11. With the transmission and transfer case in
N (NEUTRAL), push and hold the ENGINE
START/STOP button until the engine turns
off.
12. Place the transmission gear selector in
PARK. Release the brake pedal.
13. Push the ENGINE START/STOP button twice
(without pressing the brake pedal), to turn
the ignition to the off mode.
14. Attach the vehicle to the tow vehicle using a
suitable tow bar.
15. Release the parking brake.
Shifting Out Of Transfer Case N (NEUTRAL)
Use the following procedure to prepare your
vehicle for normal usage:
1. Bring the vehicle to a complete stop,
leaving it connected to the tow vehicle.
2. Firmly apply the parking brake.
3. Start the engine.
NOTE:
Steps 1 through 5 are requirements that
must be met before pushing the N
(NEUTRAL) button, and must continue to
be met until the shift has been
completed. If any of these requirements
are not met before pushing the N
(NEUTRAL) button or are no longer met
during the shift, the N (NEUTRAL) indi-
cator light will flash continuously until all
requirements are met or until the N
(NEUTRAL) button is released.
The ignition must be in the ON/RUN
mode for a shift to take place and for the
position indicator lights to be operable. If
the ignition is not in the ON/RUN mode,
the shift will not take place and no posi-
tion indicator lights will be on or flashing.
A flashing N (NEUTRAL) position indicator
light indicates that shift requirements
have not been met.
4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Using a ballpoint pen or similar object, push
and hold the recessed transfer case N
(NEUTRAL) button (located by the selector
switch) for more than four seconds.
N (NEUTRAL) Button
7. When the N (NEUTRAL) indicator light turns
off, release the N (NEUTRAL) button. After
the N (NEUTRAL) button has been released,
the transfer case will always shift to 4WD HI.
8. Shift the transmission into PARK. Turn the
engine off.
9. Release the brake pedal.
10. Disconnect vehicle from the tow vehicle.
11. Start the engine.
12. Press and hold the brake pedal.
13. Release the parking brake.
14. Shift the transmission into REVERSE or
DRIVE, release the brake pedal, and check
that the vehicle operates normally.
21_WL_OM_EN_USC_t.book Page 202
Loading ...
Loading ...
Loading ...