Loading ...
Loading ...
Loading ...
60 GETTING TO KNOW YOUR VEHICLE
HEADLIGHT ILLUMINATION ON
A
PPROACH
When enabled, the headlights, exterior door
handle pocket lights (if equipped), and interior
lights will illuminate when the unlock button on
the key fob is pushed as the operator is
approaching the vehicle. This feature can be
turned on/off, and the length of time the
headlights stay on can be programmed for up to
90 seconds within Uconnect Settings
Ú page 207.
Proximity Wake-Up — If Equipped
This feature is enabled/disabled within the
Uconnect system, and is activated when the
operator approaches the driver’s door,
passenger’s door, or liftgate with a valid key fob
on their person. Some exterior and interior
lights will illuminate in order to provide an
increased sense of welcome and security as the
operator approaches the vehicle in the dark.
“Headlight Illumination On Approach” must be
selected and set to a time value other than zero
within Uconnect Settings for Proximity Wake-Up
to activate.
The doors may be locked or unlocked for this
feature to activate, as long as the ignition is in
the OFF position, or during a Remote Start
event. It will not activate if the doors are locked
and the ignition was placed in the ON/RUN
position.
NOTE:
Proximity Wake-Up may not activate under the
following conditions:
After numerous consecutive activations, in
order to conserve the vehicle’s battery
After the vehicle’s engine has been off for
several days
Headlight Animation — If Equipped
When “Headlight Illumination On Approach” is
turned on, and set to a time value above zero,
the exterior lights illuminate in a theatrical
manner during approach to the vehicle. This
feature is activated in the following situations:
Proximity Wake-Up (if equipped) is activated
Remote Start is activated
The unlock button on the key fob is pushed
NOTE:
For Headlight Animation to activate with
Remote Start or with the push of the unlock
button, “Greeting Lights” must also be selected
within the Uconnect system.
HEADLIGHT DELAY
To aid in your exit, your vehicle is equipped with
a headlight delay that will leave the headlights
on for approximately 90 seconds. This delay is
initiated when the ignition is placed in the OFF
position while the headlight switch is on, and
then the headlight switch is cycled off.
Headlight delay can be canceled by either
turning the headlight switch on then off, or by
placing the ignition in the ON/RUN position.
note:
The headlight delay time is programmable
through Uconnect Settings Ú page 207.
LIGHTS-ON REMINDER
If the headlights or parking lights are left on
after the ignition is placed in the OFF position, a
chime will sound when the driver’s door is
opened.
21_WL_OM_EN_USC_t.book Page 60
Loading ...
Loading ...
Loading ...