Loading ...
Loading ...
Loading ...
184 STARTING AND OPERATING
SERVICE THE NIGHT VISION SYSTEM
When service conditions are present, the
following fault messages may appear in the
instrument cluster display when the vehicle is
placed in the ON position.
If "Night Vision Unavailable Sensor Blocked"
appears in the instrument cluster display, make
sure the camera is clear of snow, ice, mud, dirt
or other debris. The camera is located in the
upper fascia/bumper, inside the driver side
grille slot. Clean the camera using a soft wet
cloth or by pressing the Clean Camera soft
button in the Uconnect system. If the message
continues to appear after cycling the ignition,
see an authorized dealer.
If “Night Vision Temporarily Unavailable” or
“Night Vision Unavailable Service Required"
appears in the instrument cluster display after
cycling the ignition, see an authorized dealer.
The camera must be properly aligned to work
correctly. If the camera needs adjustment, see
an authorized dealer. Do not attempt to adjust
the camera yourself.
NIGHT VISION SYSTEM LIMITATIONS
The Night Vision display is deactivated under
the following conditions:
Vehicle is shifted into REVERSE
The ignition is not in the ON/RUN position
The headlights are off and the vehicle speed
is greater than 8 mph (13 km/h)
The Night Vision display warnings are
suppressed under the following conditions:
Daylight hours
Temperatures above 86°F (30°C)
The system may not be fully functional in the
following situations:
On steep hills
On tight curves of the road
If the camera/sensor is damaged or blocked
by dirt, snow, ice, or other debris
In poor visibility conditions such as heavy fog,
rain, snow, or other weather conditions
NOTE:
If any of these conditions are present, the
system does not need service.
SURROUND VIEW CAMERA SYSTEM —
IF EQUIPPED
Your vehicle may be equipped with the
Surround View Camera system that allows you
to see an on-screen image of the surroundings
and Top View of your vehicle whenever the gear
selector is put into REVERSE or a different view
is selected through the touchscreen soft
buttons. The Top View of the vehicle will show
which doors are open. The image will be
displayed on the Uconnect display along with a
caution note “Check Entire Surroundings”
across the top of the screen. After five seconds,
this note will disappear. The Surround View
Camera system is comprised of four sequential
cameras located in the front grille, rear liftgate
and side mirrors.
The pedestrian/animal is part of a
group
The pedestrian is wearing certain types
of clothing
The pedestrian/animal is moving too
quickly through the field of view
The sensor is blocked by dirt, rain,
snow, or ice
WARNING!
21_WL_OM_EN_USC_t.book Page 184
Loading ...
Loading ...
Loading ...