Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 59
of a digital camera mounted on the inside
rearview mirror. This camera detects vehicle
specific light and automatically switches from
high beams to low beams until the approaching
vehicle is out of view.
NOTE:
The Automatic High Beam Headlight system
can be turned on or off by selecting or dese-
lecting “Auto High Beam” within Uconnect
Settings Ú page 207.
The headlight switch must also be turned to
the AUTO position after Automatic High
Beams is enabled within Uconnect Settings
for the feature to activate.
Automatic High Beams will only activate
when the vehicle speed is above 22 mph
(35 km/h).
Broken, muddy, or obstructed headlights and
taillights of vehicles in the field of view will
cause headlights to remain on longer (closer
to the vehicle). Also, dirt, film, and other
obstructions on the windshield or camera
lens will cause the system to function improp-
erly.
If the windshield or Automatic High Beam
Headlight Control mirror is replaced, the mirror
must be re-aimed to ensure proper
performance. See a local authorized dealer.
FLASH-TO-PASS
You can signal another vehicle with your
headlights by lightly pulling the multifunction
lever toward you. This will cause the high beam
headlights to turn on, and remain on, until the
lever is released.
AUTOMATIC HEADLIGHTS
This system automatically turns the headlights
on or off according to ambient light levels. To
turn the system on, rotate the headlight switch
counterclockwise to the AUTO position. When
the system is on, the headlight time delay
feature is also on. This means the headlights
will stay on for up to 90 seconds after you place
the ignition into the OFF position. The headlight
time delay can be programmed 0/30/60/90
seconds within the Uconnect system
Ú page 207.
To turn the automatic system off, move the
headlight switch out of the AUTO position.
NOTE:
The engine must be running before the head-
lights will come on in the automatic mode.
PARKING LIGHTS AND PANEL LIGHTS
To turn on the parking lights and instrument
panel lights, rotate the headlight switch
clockwise. To turn off the parking lights, rotate
the headlight switch back to the O (off) position.
HEADLIGHTS ON AUTOMATICALLY WITH
W
IPERS
If your vehicle is equipped with Automatic
Headlights, it also has this
customer-programmable feature. When your
headlights are in the automatic mode and the
engine is running, they will automatically turn
on when the wiper system is on. This feature is
programmable through the Uconnect system
Ú page 207.
NOTE:
When your headlights come on during the
daytime, the vehicle will monitor outside bright-
ness and decide if the instrument panel needs
to be dimmed or not Ú page 62.
2
21_WL_OM_EN_USC_t.book Page 59
Loading ...
Loading ...
Loading ...