Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 69
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator
illuminates when SYNC is on. SYNC is used to
synchronize the front passenger temperature
and rear passenger temperature, mode, and
blower settings with the driver temperature,
mode, and blower settings. Changing the front
passenger temperature or rear passenger
temperature, mode, and blower settings while
in SYNC will automatically exit this feature.
NOTE:
The SYNC setting is only available on the touch-
screen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the
Climate Control system. There are
several blower speeds available. The speeds
can be selected using the blower control
buttons on the touchscreen.
Use the small blower icon to reduce the blower
setting and the large blower icon to increase the
blower setting. Blower speed can also be
selected by pressing the blower bar area
between the icons.
Mode Control
Select Mode by pressing one of the
Mode buttons on the touchscreen, or
the faceplate, to change the airflow
distribution mode. The airflow distribution mode
can be adjusted so air comes from the
instrument panel outlets, floor outlets, defrost
outlets and demist outlets.
Panel Mode
Air comes from the outlets in the
instrument panel. Each of these
outlets can be individually adjusted to
direct the flow of air. The air vanes of the center
outlets and outboard outlets can be moved up
and down or side to side to regulate airflow
direction. There is a shut off wheel located next
to the air vanes to shut off or adjust the amount
of airflow from these outlets.
Bi-Level Mode
Air comes from the instrument panel
outlets and floor outlets. A slight
amount of air is directed through the
defrost and side window demister outlets.
NOTE:
Bi-Level mode is designed under comfort condi-
tions to provide cooler air out of the panel
outlets and warmer air from the floor outlets.
Floor Mode
Air comes from the floor outlets. A
slight amount of air is directed through
the defrost and side window demister
outlets.
Mix Mode
Air is directed through the floor,
defrost, and side window demister
outlets. This setting works best in cold
or snowy conditions that require extra heat to
the windshield. This setting is good for
maintaining comfort while reducing moisture on
the windshield.
2
21_WL_OM_EN_USC_t.book Page 69
Loading ...
Loading ...
Loading ...