Loading ...
Loading ...
Loading ...
72 GETTING TO KNOW YOUR VEHICLE
The rear ATC system has floor air outlets at the
rear right side of the third row seats and
overhead outlets at each outboard rear seating
position. The system provides heated air
through the floor outlets or cool, dehumidified
air through the headliner outlets.
The rear system temperature control buttons
are located on rear of the front center console.
NOTE:
If equipped with a Four-Zone ATC system, the
left and right sides of the rear passenger zones
can be adjusted separately from the front or
rear ATC panel.
AUTO BUTTON
The AUTO button automatically
controls the interior cabin temperature
by adjusting distribution and amount
of airflow. Performing this function will cause
the system to switch between manual mode
and automatic modes Ú page 73.
REAR TEMPERATURE CONTROL
These buttons provide the left and right side of
the rear seating area with independent
temperature control.
Push the Up button on the faceplate
for warmer temperature settings.
Push the Down button on the faceplate
for cooler temperature settings.
REAR BLOWER CONTROL
Use the blower button with the “down”
arrow to reduce the blower setting, and
the blower button with the “up” arrow
to increase the blower setting. The rear blower
setting is shown in the display.
REAR MODE CONTROL
Push the rear mode button to adjust
airflow distribution. The rear mode
settings are shown in the rear display.
The rear airflow distribution mode can be
adjusted so air comes from the headliner
outlets, the floor outlets, or both.
PANEL MODE
Air comes from the outlets in the
headliner. Each of these outlets can be
individually adjusted to direct the flow
of air. Moving the air vanes of the outlets to one
side will shut off the airflow.
BI-LEVEL MODE
Air comes from both the headliner
outlets and the floor outlets.
NOTE:
In many temperature positions, the Bi-Level
mode is designed to provide cooler air out of the
headliner outlets and warmer air from the floor
outlets.
FLOOR MODE
Air comes from the floor outlets.
REAR TEMPERATURE LOCK
The Rear Temperature Lock symbol on
the rear display is illuminated when
the rear controls are locked by the
front system.
Rear Lock
Pressing the Rear Temperature Lock button on
the Uconnect touchscreen will illuminate a lock
symbol in the rear display. The rear temperature
and air source are then controlled from the front
Uconnect system.
21_WL_OM_EN_USC_t.book Page 72
Loading ...
Loading ...
Loading ...