Loading ...
Loading ...
Loading ...
142 STARTING AND OPERATING
Auto Entry/Exit Mode
To assist in entering and exiting the vehicle, the
air suspension system has a feature which
automatically lowers the vehicle to entry/exit
ride height Ú page 207. When towing, the
automatic Entry/Exit mode may be disabled
through Uconnect to prevent vehicle and trailer
movement when the gear selector is moved to
PARK.
NOTE:
This mode is intended to be enabled with the
ignition on.
Transport Mode
To assist with flat bed towing, the air
suspension system has a feature which will put
the vehicle into Entry/Exit height and disable
the automatic load leveling system
Ú page 207.
NOTE:
This mode is intended to be enabled with igni-
tion on.
Suspension Display Messages Mode
The “Suspension Display Messages” setting
allows you to only display suspension warnings
Ú page 207.
NOTE:
This mode is intended to be enabled with the
ignition on.
Wheel Alignment Mode
Before performing a wheel alignment this mode
must be enabled Ú page 207.
NOTE:
This mode is intended to be enabled with the
ignition on.
If equipped with a touchscreen radio, all
enabling/disabling of air suspension features
must be done through the radio Ú page 207.
INSTRUMENT CLUSTER DISPLAY
M
ESSAGES
When the appropriate conditions exist, a
message will appear in the instrument cluster
Ú page 98.
OPERATION
The indicator lamps 1 through 5 will illuminate
to show the current position of the vehicle.
Flashing indicator lamps will show a position
which the system is working to achieve. When
raising, if multiple indicator lamps are flashing
while raising, the highest flashing indicator
lamp is the position the system is working to
achieve. When lowering, if multiple indicators
are flashing while lowering, the lowest solid
indicator lamp is the position the system is
working to achieve.
Toggle up once will move the suspension one
position higher from the current position,
assuming all conditions are met (i.e. ignition on,
speed below threshold, etc). Toggle up can be
pushed multiple times. Each toggle up will raise
the requested level by one position up to a
maximum position of OR2 or the highest
position allowed based on current conditions
(i.e. vehicle speed, etc).
Toggle down once will move the suspension one
position lower from the current level, assuming
all conditions are met (i.e. ignition on, doors
closed, speed below threshold, etc). Toggle
down can be pushed multiple times. Each
toggle down will lower the requested level by
one position down to a minimum of Entry/Exit
Mode or the lowest position allowed based on
current conditions (i.e. vehicle speed, etc.)
21_WL_OM_EN_USC_t.book Page 142
Loading ...
Loading ...
Loading ...