Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 73
Rear seat occupants can only adjust the rear
ATC control when the Rear Temperature Lock
button is turned off.
The rear ATC is located on the rear of the front
center console.
Press the Rear Temperature Lock button on
the front Uconnect touchscreen a second
time to turn the Rear Temperature Lock icon
off in the rear display.
Push a rear blower button, adjust the
temperature using the rear up and down
arrows, and select a control mode to suit the
rear occupant’s needs.
ATC is selected by pushing the AUTO button
on the rear climate control faceplate.
Once the desired temperature is shown on the
rear display, the ATC System will automatically
achieve and maintain that comfort level. When
the system is set up for your comfort level, it is
not necessary to change the settings. You will
experience the greatest efficiency by simply
allowing the system to function automatically.
AUTOMATIC TEMPERATURE CONTROL
(ATC)
Automatic Operation
1. Push the AUTO button on the front
Automatic Temperature Control (ATC)
Panel and the word “AUTO” will illuminate
in the front ATC display, along with two
temperatures for the driver and front
passenger. The system will then automat-
ically regulate the amount of airflow.
2. Adjust the temperature you would like the
system to maintain, by adjusting the driver,
passenger, and rear temperatures. Once
the desired temperature is displayed, the
system will achieve and automatically
maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
settings. You will experience the greatest
efficiency by simply allowing the system to
function automatically.
NOTE:
It is not necessary to move the temperature
settings. The system automatically adjusts the
temperature, mode and fan speed to provide
comfort as quickly as possible.
To provide you with maximum comfort in the
automatic mode, during cold start-ups, the
blower fan will remain on low until the engine
warms up. The fan will engage immediately if
the Defrost mode is selected, or by changing the
front blower knob setting.
Manual Operation Override
This system offers a full complement of manual
override features. The AUTO symbol in the front
ATC display will be turned off when the system
is being used in the manual mode.
NOTE:
The system will not automatically sense the
presence of fog, mist or ice on the windshield.
Defrost mode must be manually selected to
clear the windshield and side glass.
2
21_WL_OM_EN_USC_t.book Page 73
Loading ...
Loading ...
Loading ...