Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 29
Do NOT Grab The Door Handle When Locking
NOTE:
After touching the door handle lock icon, you
must wait two seconds before you can lock or
unlock the doors using any Passive Entry
door handle. This is done to allow you to
check if the vehicle is locked by pulling the
door handle, without the vehicle unlocking.
If Passive Entry is disabled using the
Uconnect Settings, the key protection
described in "Frequency Operated Button
Integrated Key (FOBIK-Safe)" remains active/
functional.
The Passive Entry system will not operate if
the key fob battery is depleted.
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built
into the electronic liftgate release button. With
a valid Passive Entry key fob within 5 ft (1.5 m)
of the liftgate, push the electronic liftgate
release button for a power open on vehicles
equipped with Power Liftgate. Pull the
electronic liftgate handle and lift for Manual
Liftgate vehicles.
Electronic Liftgate Handle
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, push the Passive Entry
lock button located on the outside liftgate door
handle.
NOTE:
The liftgate Passive Entry lock button will lock all
doors and the liftgate Ú page 395.
AUTOMATIC UNLOCK DOORS ON EXIT
The doors will unlock automatically on vehicles
with power door locks after the following
sequence of actions:
1. The Automatic Unlock Doors On Exit
feature is enabled within Uconnect
Settings
Ú
page 207.
2. All doors are closed.
3. The gear selector was not in PARK, then is
placed in PARK.
4. Any door is opened.
1 — Passive Entry Lock Button
2 — Electronic Liftgate Release Button
2
21_WL_OM_EN_USC_t.book Page 29
Loading ...
Loading ...
Loading ...