Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
lever, or the button on the multifunction
st
eering wheel.
●
In vehicles with the LongLife system in
which the battery has been disconnected
for a long period of time, it is not possible to
calculate the date of the next service.
Therefore the service interval display may
not be correct. In this case, bear in mind the
maximum service intervals permitted
›››
page 340.
●
If you reset the display manually, the next
service interval will be indicated as in vehi-
cles with fixed service intervals. For this
reason we recommend that the service in-
terval display be reset by a SEAT author-
ised Dealer.
Using the instrument panel
Intr
oduction
With the ignition switched on, it is possible to
r
ead the different functions of the display by
scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operat-
ed with the steering wheel buttons.
Some menu options can only be read when
the vehicle is at a standstill.
WARNING
Distracting the driver in any way can lead
t
o an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
Note
After loading or changing the 12-volt bat-
t
ery, check the system settings. If the pow-
er supply is interrupted, the system settings
might be incorrect or deleted.
Operation using the multifunction
st
eering wheel
Fig. 81
Multifunction steering wheel: buttons
f
or using the instrument panel menus.
As long as a priority 1
›
››
page 76 warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button
of the multifunction
st
eering wheel
›››
Fig. 81.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button
›
››
Fig. 81; if necessary,
several times.
●
Use the or
›››
Fig. 81 to switch be-
tween menus.
●
To open the menu or the information dis-
played, press the button
›
››
Fig. 81 or wait
a few seconds until the menu or the informa-
tive display opens automatically.
Changing menu settings
●
In the menu displayed, turn the right thumb-
wheel of the multifunction steering wheel
›››
Fig. 81 until the desired option of the menu
is highlighted. The option appears framed.
●
Press the button
›
››
Fig. 81 to make the
required modifications. A mark indicates that
the system or function is activated.
Back to menu selection
Press the or
›››
Fig. 81 button.
85
Loading ...
Loading ...
Loading ...