Loading ...
Loading ...
Loading ...
Self-help
Changing a wheel
Intr
oduction
The SEAT Alhambra is equipped as standard
with anti-punct
ure technology tyres (Conti-
Seal). In the event of a puncture or air leak of
up to 5 mm, the tyre seals the hole with a pro-
tective layer inside the tread.
The inclusion of this technology means that
there is no type of spare wheel included in
the vehicle's equipment.
Not all Alhambra models have the TMS (Tyre
Mobility System).
If a tyre needs to be changed the tools nec-
essary are available at spare parts dealers:
●
Jack,
●
box spanner for wheel nuts,
●
tool to remove wheel bolt caps
The t
yres mounted on the vehicle are anti-
puncture. The wheels should only be
changed when switching from summer to
winter tyres or vice-versa.
The vehicle only comes with the necessary
tools for changing wheels if factory supplied
with winter tyres. If this is not the case, you
need to go to a specialised workshop to get
the wheels changed.
What to do first
●
Park the vehicle on a horizontal surface and
in a saf
e place as far away from traffic as
possible.
●
Apply the electronic parking brake.
●
Switch on the hazard warning lights.
●
Manual transmission: select the 1st gear.
●
Automatic transmission: Move the selector
lever to position P.
●
If you are towing a trailer, unhitch it from
your vehicle.
●
Keep the vehicle tool kit available
›
››
page 41.
●
Observe the applicable legislation for each
country (reflective vest, warning triangles,
etc.).
●
All occupants should leave the vehicle and
wait in a safe place (for instance behind the
roadside crash barrier).
WARNING
●
Al
ways observe the above steps and pro-
tect yourself and other road users.
●
If you change the wheel on a slope, block
the wheel on the opposite side of the car
with a stone or similar to prevent the vehi-
cle from moving.
Integral wheel trim
Fig. 42
Remove the wheel cover.
The wheel covers must be removed for ac-
cess t
o the wheel nuts.
Removing
●
Take the wheel brace and the wire hook
from the vehicle tool kit
›››
page 41.
●
Hook the wire through one of the grooves of
the trim.
●
Insert the box spanner through the hook,
rest it on the tyre and remove the wheel trim
›››
Fig. 42.
Fitting
Before installing the full trim, the anti-theft
wheel lock must be threaded into position
›››
Fig. 46
2
ó
3
. Otherwise it will not be
possibl
e to install the full hubcap.
»
45
Loading ...
Loading ...
Loading ...