Loading ...
Loading ...
Loading ...
Seats and headrests
Initialising the seat position memory
The position memory syst
em must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.
●
Open the driver door and do not get into
the vehicle.
●
Operating the seat settings from outside
the vehicle.
●
Move the angle of the seat backrest com-
pletely forwards.
●
Release the control to set the angle and
then press again until an audible warning is
heard.
WARNING
Adjust the memory function only when the
v
ehicle is stationary.
Note
The front passenger side exterior mirror au-
t
omatically changes from the position stor-
ed for reversing as soon as the vehicle
moves forward at a speed of at least
15 km/h (9 mph) or when the gear selection
lever is changed to a position other than R.
Access aid for the third row of seats
Fig. 137
Second row of seats:: access aid con-
tr
ols.
The outer seats of the second row can be fol-
ded t
o make it easier to get in and out of the
third row of seats.
Folding down the second row seats
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If necessary, remove the side headrest of
the integrated child seat
›››
page 36.
●
If necessary, raise the armrests.
●
Remove any objects located in the footwell
of the second row of seats, where applicable
›››
.
●
Push the headrest down as far as it will go
›
››
page 12.
●
Push the lever
›››
Fig. 137
1
forwards and
f
old the backrest of the rear seat. This seat
folds forward completely
›››
and can still
be mo
ved further forward.
●
Always take care when entering and leav-
ing the vehicle
›››
.
R
epositioning the seat in the second row
●
Lift the backrest of the rear seat in an up-
right position. The entire seat folds back-
wards
›››
.
●
Make sure that the rear seat is securely en-
gaged so that the seat belts can pr
ovide
proper protection in the rear seats. The red
mark
›››
Fig. 137
2
should no longer be visi-
bl
e
›››
in Folding the rear seats down as
a car
go surface on page 144.
Emergency exit function
If the lever
›››
Fig. 137
1
does not work, e.g.
aft
er an accident, the seats on the second
row can be folded forwards from the third row
to allow vehicle occupants of the third row of
seats to get out of the vehicle
›››
.
●
Pull the handle
›
››
Fig. 137
3
back and fold
the backr
est of the rear seat. The complete
rear seat folds forward
›››
.
WARNING
Careless or uncontrolled use of the con-
v
enient entry assistant may result in severe
injury and accident.
»
137
Loading ...
Loading ...
Loading ...