Loading ...
Loading ...
Loading ...
Practical tips
Refilling AdBlue
Only use AdBlue® that complies with the
ISO 222
41-1 standard. Only use original
containers.
●
Observe the instructions and information
provided by the refill bottle manufacturer.
●
Observe the expiry date.
●
Unscrew the cap on the refill bottle.
●
Place the refill bottle
2
upside down inside
the t
ank filler neck.
●
Press the refill bottle against the filler neck
and keep in this position.
●
Add at least 5.0 litres of AdBlue (6 bot-
tles). A lower quantity would be insufficient.
●
Wait until the contents of the refill bottle
have been poured into the AdBlue tank. Do
not crush or damage the bottle!
●
Unscrew the liquid bottle anticlockwise and
remove it carefully
›››
.
●
You can tell when the AdBlue tank is full be-
cause the bottl
e will be empty.
Closing the tank filling neck
●
Screw on the tank filler neck cap
›››
Fig. 284
1
clockwise until it is fully inser-
t
ed.
●
Place the cover and turn the shut off anti-
clockwise to close it.
Operations before driving
●
After refilling the tank, only switch on the ig-
nition.
●
Leave the ignition on for at least 30 sec-
onds for the system to detect the fluid load.
●
Make sure you wait for at least 30 seconds
before starting the engine!
WARNING
AdBlue® should only be stored in its origi-
nal cont
ainer, which should be tightly
closed and kept in a safe place.
CAUTION
●
Only use AdBlue® that complies with the
ISO 222
41-1 standard. Only use original
containers.
●
Never mix AdBlue® with water, fuel or ad-
ditives. Any type of damage caused by
such a mixture will not be covered by the
warranty.
●
Never pour AdBlue® into the fuel tank!
This could result in engine damage.
●
Do not carry the refill bottle inside the
vehicle. If there is a leak (due to tempera-
ture changes or damage to the bottle), the
AdBlue® may damage the vehicle's interior.
For the sake of the environment
Dispose of the refill bottle in an environ-
ment
-friendly manner.
Note
Suitable AdBlue® refill bottles can be pur-
chased fr
om SEAT dealerships.
Engine management and
emissions contr
ol system
Introduction
WARNING
●
Due t
o the high temperatures reached by
the exhaust gas scrubbing system, you
should not park your vehicle near a surface
that can catch fire easily. Fire hazard!
●
Do not apply wax underneath the vehicle
around the area of the exhaust system: Fire
hazard!
Control lamps
It lights up
Fault in the emission control system.
R
educe speed and drive carefully to the nearest spe-
cialised workshop to have the engine checked.
316
Loading ...
Loading ...
Loading ...