Loading ...
Loading ...
Loading ...
Visibility
with automatic adjustment for anti-dazzle
position.
●
If you have to stick any type of sticker on
the windscr
een, do not do so in front of the
sensors. Doing so could prevent the anti-
dazzle function from working well or even
from working at all.
Adjusting the exterior mirrors
Fig. 125 Detail of the driver's door: control for
the e
xterior mirror.
Turn the control to the corresponding posi-
tion:
T
urning the knob to the desired position,
adjust the mirrors on the driver side (L,
L/R
left) and the passenger side (R, right) to
the direction desired.
Depending on the equipment fitted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Folding in mirrors.
Synchronized regulation of the exterior
mirrors
In the Settings - Convenience menu, se-
lect whether or not the mirrors should move in
synchronisation
›››
page 72.
●
Turn the knob to position L
1)
.
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary, correct the right-hand rear-
view mirror: rotate the control to position R
1)
.
Automatic anti-dazzle exterior mirror, driv-
er side
The automatic anti-dazzle exterior mirror is
controlled in the same way as the automatic
anti-dazzle rear vision mirror
›››
page 128.
Store the reverse settings for the passen-
ger exterior mirror
●
Select the vehicle key in which the setting is
to be stored.
●
Use this key to unlock the vehicle.
●
Connect the automatic parking brake.
●
Turn the exterior mirror knob to position R
(passenger side).
●
Switch the ignition on.
●
Move the gear lever to neutral.
●
Access the Settings menu on the instru-
ment panel display using the multifunction
steering wheel buttons and select Conven-
ience.
●
Select the Rear vision mirror adjust-
ment function (if it is already checked, un-
check it and check the option again).
●
Select reverse gear.
●
Adjust the front passenger side exterior mir-
ror so that you can see, for example, the kerb
area.
●
The new position of the mirror will be stored
automatically and allocated to the vehicle
key that was used to unlock the vehicle. For
vehicles with seat memory, please see
›››
page 135.
»
1)
Regulation in right-hand drive vehicles is sym-
metrical.
129
Loading ...
Loading ...
Loading ...