Loading ...
Loading ...
Loading ...
Error Message Cause Action
Registration
Registration failed.
• Press and hold down to turn off the
machine. Wait a few seconds, and then turn it
on again. Perform the color correction again
using the LCD.
• Install a new belt unit.
• If the problem continues, contact Brother
Customer Service or your local Brother dealer.
Replace Toner
The toner cartridge is at the end
of its life. The machine stops all
print operations.
While memory is available,
faxes are stored in the memory.
Replace the toner cartridge for the color indicated
on the LCD.
See Related Information: Replace the Toner
Cartridge.
Replace WT Box
It is time to replace the waste
toner box.
Replace the waste toner box with a new one.
See Related Information: Replace the Waste
Toner Box.
Self-Diagnostic
The temperature of the fuser
unit does not rise to a specified
temperature within the specified
time.
Press and hold to turn off the machine, wait a
few seconds, and then turn it on again. Leave the
machine idle for 15 minutes with the power on.
The fuser unit is too hot.
Size Error
The paper size defined in the
printer driver is not supported
by the defined tray.
Choose a paper size supported by the defined
tray.
Size Error 2-sided
The paper size specified in the
machine's paper size setting is
not available for automatic 2-
sided printing.
Press (if required).
Load the correct size of paper in the tray and set
the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper sizes available for automatic 2-sided
printing are Letter, Legal, Mexico Legal, India
Legal, and Folio.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Size Mismatch
The paper in the tray is not the
correct size.
Load the correct size of paper in the tray and set
the size of paper for the tray.
Storage Full
The machine's memory does
not have enough free space to
store secure print data.
Press and delete the previously stored
secure print data.
Supplies
Belt End Soon
The belt unit is near the end of
its life.
Order a new belt unit before the LCD displays
Replace Belt.
Supplies
Drum End Soon
The drum unit is near the end of
its life.
Order a new drum unit before the LCD displays
Replace Drum.
Supplies
Replace Belt
It is time to replace the belt unit. Replace the belt unit with a new one.
See Related Information: Replace the Belt Unit.
Supplies
Replace Drum
It is time to replace the drum
unit.
Replace the drum unit for the color indicated on
the LCD.
If this message is displayed
even after replacing the drum
unit with new one, the drum unit
counter was not reset.
Reset the drum unit counter.
See Related Information: Replace the Drum Unit.
440
Loading ...
Loading ...
Loading ...