Loading ...
Loading ...
Loading ...
DAYTIME RUNNING LIGHTS
(DRLS) — IF EQUIPPED
The Daytime Running Lights are active when the low
beams are not on, and the engine is running. DRLs may
be deactivated by applying the parking brake.
NOTE:
•
For vehicles sold in Canada, the Daytime Running
Lights will automatically deactivate when the front
fog lights are turned on.
•
On some vehicles, the Daytime Running Lights may
deactivate, o r reduce intensity, on one side of the
vehicle (when a turn signal i s activated on that
side), or on both sides of the vehicle (when the haz-
ard warning lights are activated).
HIGH/LOW BEAM SWITCH
Push the multi funct io n lever toward the instrument
panel to switch the headlights to high beams. The lever
will return to the centered position. To return the head-
lights to low beam, pull the lever toward the steering
wheel, or push the lever toward the instrument panel.
AUTOMATIC HIGH BEAM
HEADLAMP CONTROL —
IF EQUIPPED
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by auto-
matically controlling the high beams through the use of
a camera mounted on the vehicle’s header. This cam-
era detects vehicle specific light and automatically
switches from high beams to low beams until the
approaching vehicle is out of view.
NOTE:
•
The Automatic High Beam Headlamp Control can be
turned on or off by selecting “ON” under “Auto High
Beam” within your Uconnect Settings
page 201,
as well as turning the headlight switch to the AUTO
position and placing the multifu ncti on lever in the
high beam positio n.
•
Broken, muddy, or obstructed headlights and tail-
lights of vehicles in the field of view will cause head-
lights to remain on longer (closer to the vehicle).
Also, dirt, film, and other obstructions on the wind-
shield or ca mer a lens will cause the system to func-
tion improperly.
FLASH-TO-PASS
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will cause the high beam headlights to tu rn on, and
remain on, unt il the lever is released.
AUTOMATIC HEADLIGHTS —
IF EQUIPPED
This system automatically turns the headlights on or o ff
according to ambient light levels. To turn the system on,
rotate the headlight switch clockwise to the last detent for
automatic headlight operation. When the system is on,
the headlight ti me delay feature is also on. This means
the headlights will stay on for up to 90 seconds after you
place the ignitio n into the OFF position. To turn the auto-
matic system off, move the headlight switch out of the
AUTO posi ti on.
NOTE:
The engine must be running before the headlights will
come on in the automatic mode.
LIGHTS-ON REMINDER
If the headli ghts, parking lights, or cargo lights are left
on after the ignition is placed in the OFF position, a
chime will sou nd when the driver’s door is opened.
Multifunction Lever
GETTING TO KNOW YOUR VEHICLE 71
2
Loading ...
Loading ...
Loading ...