Loading ...
Loading ...
Loading ...
Stop Safely And Leave The Vehicle As
Soon As Possible — PHEV Only
A warning will appear on the instrument panel display if
the system detects the high voltage battery has over-
heated. This can re sult in a vehicle fire, and the release
of toxic and/or flammable gases. To reduce the risk of a
larger fire, the vehicle’s high voltage propulsion system
will turn off within thirty seconds of displaying this
warning. At that time, the vehicle may not acce ler ate.
You can still steer and brake the vehicle.
Stop and park the vehicle in an open area.Haveall
passengers exit the vehicle as soon as possible and
move to a safe distance away from the vehicle. After all
passengers safely exit the vehicle, call emergency
responders immediately.
Even if you do not see flames, a fire may start at any
moment, so do not attempt to re-enter or start the
vehicle.
•
This message will be displayed continuously.
•
Cannot be cleared with a button press.
•
A continuous and rapid chi me will sound.
CAUTION!
If the instru ment cluster instructs you to change the
engine oil, d o not reset the service indicator wit hou t
changing the oil. Engine damage may result.
CAUTION!
•
An overheated High Voltage Battery may result in
electrical systems damage. Do not attempt to restart
the vehicle. The vehicle must be towed to an autho-
rized dealer.
OIL CHANGE RESET — IF EQUIPPED
Use this QR code to access your digital
experience.
Your vehicle may be equipped with an
engine oil change indicator system. The
“Oil Change Required” message will dis-
play in the instrument cluster display for
five seconds after a single chime has
sounded to indicate the next scheduled oil change
interval.
The engine oil change indicator system is duty cycle
based, which means the engine oil change interval may
fluctuate, dependent upon your personal driving style.
Unless reset, t his message will continue to display each
time you place the ignition in the ON/RUN position. To
turn off the message temporarily, push and release the
OK
button. To reset the oil change indicator system
(after performing the schedule d maintenance), refer to
the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition
in the ON/RUN mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instrument cluster display.
3. Push and hold the OK button until the gauge resets
to 100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, place the ignition
in the OFF position.
NOTE:
If the indic ator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Stop Safely And Leave The Vehicle As Soon As Possible
Warning Message
Scan me
GETTING TO KNOW YOUR INSTRUMENT PANEL 125
3
Loading ...
Loading ...
Loading ...