Loading ...
Loading ...
Loading ...
5. Remove the air filter from the HVAC air inlet housing.
Pull the filter elements out pinching them to the
right for clearance.
6. Install the cabin air filter with the air filter position
indicators pointing in the same direction as removal.
CAUTION!
The cabin air filter is identif ied with an arrow to indi-
cate airflow direction through the filter. Failure to
properly install the filter will result i n the need to
replace it mo re often.
7. Close cabin air filter access door and secure retain-
ing tabs.
8. Rotate the glove compartment door back into posi-
tion ensuring you have properly engaged the travel
dampener.
For the proper maintenance intervals, see
page 282.
BODY LUBRICATION
Locks and all body pivot points, including such items as
seat tracks, d oor hinge pivot points and rollers, liftgate,
tailgate, decklid, sliding doors and hood hinges, should
be lubricated periodically with a lithium based grease,
such as Mopar® Spray White Lube to ensure quiet,
easy operation and to protect against rust and wear.
Prior to the application of any lubricant, the parts con-
cerned should be wiped clea n to remove dust and grit;
after lubricating excess oil and grease should be
removed. Particular attention should also be given to
hood latching co mponents to ensure proper function.
When performing other underhood services, the hood
latch release mechanism, and safety catch should be
cleaned and lu bric ated.
The external lock cylinders should be lubricated twice a
year, preferably in the Fall and Spring. Apply a small
amount of a high quality lubricant, such as Mopar®
Lock Cylinder Lubricant directly into the lock cylinder.
WINDSHIELD WIPER BLADES
Clean the rubber edges of the wiper blades and the
windshield periodically with a sponge or soft cloth and
a mild nonabrasi ve cleaner. This will remove accumula-
tions of salt or road film.
Operation of the wipers on dry glass for long periods
may cause deterioration of the wiper blades. Always
use washer fluid when using the wipers to remove salt
or dirt from a dry windshield.
Avoid using the wiper blades to remove frost or ice from
the windshield. Keep the blade rubber out of contact
with petroleum products such as engine oil, gasoline,
etc.
NOTE:
Life expectancy of wiper blades varies depending on
geographical area and frequency of use. Poor perfor-
mance of blades may be present with chattering,
marks, water lines or wet spots. If any of these condi-
tions are pr ese nt, clean the wiper blades or replace as
necessary.
The wiper blades and wiper arms should be inspected
periodically, not just when wiper performance problems
are experienced. This inspection should include the
following points:
•
Wear or uneven edges
•
Foreign material
•
Hardening or cracking
•
Deformation or fatigue
Air Filter
Travel Dampener
1 — Travel Dampener Housing
2 — Travel Dampener Rod
298 SERVICING AND MAINTENANCE
Loading ...
Loading ...
Loading ...