Loading ...
Loading ...
Loading ...
Adaptive Cruise Control Ready
When ACC is activated, but the vehicle speed setting
has not been selected, the display will read “Adaptive
Cruise Control Ready.”
Adaptive Cruise Control Set
When the SET (+) or the SET (-) button is pushed, the
display will read “ACC SET.”
When ACC is set, the set speed will show in the instru-
ment cluster display.
The ACC screen may display once again if any of the
following ACC activity occu rs:
•
System Cancel
•
Driver Override
•
System Off
•
ACC Proximity Warning
•
ACC Unavailable Warning
The instrument cluster display will return to the last
display selected after five se co nds of no ACC display
activity.
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is 20 mph
(32 km/h).
When the system is turned on and in the ready state,
the instrument cluster displays “ACC Ready.”
When the system is off, the i nstr ume nt cluster displays
“Adaptive Cruise Control (ACC) Off.”
NOTE:
You cannot engage ACC under the following conditions:
•
When in 4WD Low
•
When the brakes are applied
•
When the parking brake is applied
•
When the automatic transmission is in PARK,
REVERSE or NEUTRAL
•
When the manual transmission is in FIRST gear
•
When the vehicle speed is below 20 mph (32 km/h)
(manual transmission)
•
When the vehicle speed is below the minimum
speed range
•
When the brakes are overheated
•
When the driver’s door is open at low speeds
•
When the driver’s seat belt is unbuckled at low
speeds
•
When ESC Full Off mode is active
•
When Off Road+ (if equipped) is active
To Activate/Deactivate
Push and relea se the Adaptive Cruise Control (ACC)
on/off button. The ACC menu in the inst ru ment cluster
display will read “ACC Ready.”
To turn the system off, push and release the Adaptive
Cruise Control (ACC) on/of f button again. At this time,
the system will t urn off and t he instrument cluster dis-
play will read “Adaptive Cruise Control (ACC) Off.”
WARNING!
Leaving the Adaptive Cruise Control (ACC) system on
when not in use is dangerous. You c ould accidentally
set the system or cause i t to go faster than you want.
You could lose control and have a collision. Always
leave the system off when you are not using it.
To Set A Desired Speed
When the vehicle reaches the speed desired, push the
SET (+) button or the SET (-) button and release. The
instrument cluster display will show the set speed.
NOTE:
Fixed Speed Cruise Control can be u sed without ACC
enabled. To change between the different modes, push
the ACC on/off button which turns the ACC and t he
Fixed Speed Cruise Control off. Pushing the Fixed
Speed Cruise Control on/off button will result in turning
on (changing to) Fixed Speed Cruise Control mode.
WARNING!
In Fixed Speed Cr ui se Control mode, the system will
not react to vehicles ahea d. In addition, the proximity
warning does not acti vate and no alarm will sound
even if you are too close to the vehicle ahead since
neither the presence of the vehicle ahead nor the
vehicle-to-vehicle distance is detected. Be sure to
maintain a safe distance between your vehicle and
the vehicle ahead. Always be aware which mode is
selected.
If ACC is set when the vehicle speed is below 20 mph
(32 km/h), the set speed will default to 20 mph
(32 km/h).
NOTE:
Fixed Speed Cruise Control cannot be set below
20 mph (32 km/h).
If either system is set whe n the vehicle speed is above
20 mph (32 km/h), the set speed shall be the current
speed of the vehicle.
17 4 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...