Loading ...
Loading ...
Loading ...
FOUR-POSITION TRANSFER CASE —
IF EQUIPPED
The transfer case provides four positions:
•
2H — Two-Wheel Drive High Range
•
4H — Four-Wheel Drive High Range
•
N (Neutral)
•
4L — Four-Wheel Drive Low Range
For additional information on the appropriate use of
each transfer case position, see the following:
2H
Two-Wheel Drive High Range — This range is for normal
street and highway driving on dry, hard surfaced roads.
4H
Four-Wheel Drive High Range — This range maximizes
torque to the front driveshaft, forcing the front and rear
wheels to rotate at the same speed. This range pro-
vides additional traction for loose, slippery road sur-
faces only.
N (Neutral)
WARNING!
You or others could be injured o r killed if you leave the
vehicle unattended with the transfer case in the (N)
Neutral position without first fully engaging the parking
brake. The transfer case (N) Neutral position disen-
gages both the front and rear driveshafts from the pow-
ertrain, and will allow the vehicle to roll, even if the auto-
matic transmission is in PARK (or manual transmission
is in gear). The parking brake should always be applied
when the driver is not in the vehicle.
N (Neutral) — This range disengages both the front and
rear driveshafts from the powertrain. To be used for flat
towing behind another vehicle
page 193.
4L
Four-Wheel Drive Low Range — This range provides low
speed four-wheel drive. It maximizes torque to the front
driveshaft, forcing the front and rear wheels to rotate at
the same speed . This range provides additional traction
and maximum pulli ng power for loose, slippery road
surfaces only. Do not exceed 25 mph (40 km/h).
The transfer case is intended to be driven in the 2H
position for normal street and highway conditions, such
as hard-surfaced roads.
In the event that additional traction is required, the
transfer case 4H and 4L positions can be used to lock
the front and re ar driveshafts together, forcing the front
and rear whee ls to rotate at the same speed. The 4H
and 4L positio ns are intended for loose, slippery road
surfaces only and not intended for normal driving. Driv-
ing in the 4H and 4L positions on hard-surfaced roads
will cause incr eas ed tire wear and damage to the drive-
line components. For further information on shifting
into4Hor4L
page 155.
The instrument cluster alert s the driver that the vehicle
is in four-wheel drive, and the front and rear driveshafts
are locked together. The light will illuminate when the
transfer case is shifted into the 4H position.
When operating your vehicle in 4L, the engine speed
will be approximately three times (four times for Rubi-
con models) that of the 2H or 4H positions at a given
road speed. Take care not to overspeed the engine.
Proper operation of four-wheel drive vehicles depends
on tires o f equal size, type, and circumference on each
wheel. Any difference will adversely affect shi fting and
cause damage to the transfer case.
Because four-wheel drive provides improved traction,
there is a tendency to exceed safe turning and stopping
speeds. Do not go faster than road conditions permit.
Shifting Procedures
2H TO 4H OR 4H TO 2H
Shifting between 2H and 4H can be made with the
vehicle stopped or in motion. The preferred shifting
speed would be 0 to 45 mph (72 km/h). With the
vehicle in motion, the transfer case will engage/
disengage faster if you momentar ily release the accel-
erator pedal after completing the shift. Do not acceler-
ate while shifting the transfer case. Apply a constant
force when shifting the transfer case lever.
Four-Wheel Drive Gear Selector
STARTING AND OPERATING 155
4
Loading ...
Loading ...
Loading ...