Loading ...
Loading ...
Loading ...
Power Lumbar — If Equipped
Vehicles equipped with power driver or passenger seats
may be equipped with power lumbar. The power lumbar
switch is located on the ou tboa rd side of t he power
seat. Push the switch forward to increase the lumbar
support. Push the switch rearward to decrease the lum-
bar support. Pushing upward or downward on the
switch will rais e and lower the position of the support.
MANUAL ADJUSTMENT FRONT
SEATS — IF EQUIPPED
Manual Front Seat Forward/Rearward
Adjustment
The seat can be adjusted forward or rearward by using
a bar located by the front of the seat cu shio n, near the
floor. While sitting in the seat, lift up on the bar located
under the seat cushion a nd move the seat forward or
rearward. Release the bar once you have reached the
desired position. Then, using body pressure, move for-
ward and rear ward on the seat to be sure that the seat
adjusters have latched.
WARNING!
•
Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collisi on and serious
injury or death.
•
Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.
Manual Seat Height Adjustment
The driver's seat height can be raised or lowered by
using the rat che ting handle, located on the outbo ard
side of the seat. Pull upward on the handle to raise the
seat, push downward on the handle to lower the seat.
Several strokes may be necessary to achieve the
desired position.
Manual Front Seat Recline Adjustment
To recline the seat, pull on the recline strap and lean
forward or backward, depending on the direction you
would like the seatback to move. Release the strap
when the desi re d position is reached and the seatback
will lock into place.
Power Lumbar Switch
Adjustment Bar Location Seat Height Adjustment
Recline Strap
58 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...