Loading ...
Loading ...
Loading ...
4. Place the bracket bushing behind the mirror bracket
(over the cowl bolt hole), then insert the bracket bolt
into the mirror bracket, through the bracket bushing.
5. Insert the hinge shoulder bolt through the bottom of
the upper do or hinge up into the mi rror bracket,
then rotate the bracket knob toward the rear of the
vehicle to secure the mirror bracket to the A-pillar.
6. Tighten both the bracket bolt and the hinge shoul-
der bolt wit h a #40 Torx head driver. Recommended
torque specification for the bracket bolt is 6 ft-lb
(8 N·m), and 7.5 ft-lb (10 N·m) for the hinge shoulder
bolt.
7. Lower the mirror assembly onto the mirror bracket.
8. Insert the three mirror screws into the mirror assem-
bly, and tighten into the mirror bracket using a
#30 Torx head driver. Recommended torque specifi-
cation for the mirror screws is 4 ft-lb (5.5 N·m).
9. Repeat the steps on the other side of the vehicle.
NOTE:
If this kit is being installed with the optional lamp
bracket, the bracket bushing from step 4 is not needed.
Use the spacer from the lamp bracket.
HALF-DOOR INSTALLATION —
IF EQUIPPED
CAUTION!
•
Do not run half-doors through an automatic car
wash. This may result in scratches and wax
buildup on the windows.
(Continued)
Attaching Mirror Bracket To The Vehicle
1 — Bracket Bushing
2 — Brac ket Bolt
Attaching Mirror Bracket To The Vehicle
1 — Brac ket Knob
2 — Hinge Shoulder Bolt
Lower Mirror Assembly Onto Bracket
Mirror Screw Locations
50 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...