User Manual - Page 173

For 2024 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
2. The STOP/START OFF message will appear in the
instrument cluster
page 124.
3. At the next vehicle stop (after turning off the Stop/
Start system), the engine will not be stopped.
4. If the Stop/Start system is manually turned off, the
engine can only be started and stopped by cycling
the ignition switch.
5.
The Stop/Start system will reset itself back to an ON
condition every time the ignition is turned off and back
on.
TO MANUALLY TURN ON THE
STOP/START SYSTEM
Push the Stop/Start OFF switch (located on the switch
bank). The light on the switch will turn off.
SYSTEM MALFUNCTION
If there is a malfunction in the Stop/Start system, the
system will not shut down the engine. A “SERVICE
STOP/START SYSTEM” message and a yellow Stop/
Start telltale will appear in the Instrument Cluster
Display
page 124.
If the “SERVICE STOP/START SYSTEM” message
appears in the instrument cluster display, have the sys-
tem checked by an authorized dealer.
If a malfunction occurs duri ng an autostop, the vehicle
may not auto start and will need a key start.
CRUISE CONTROL SYSTEMS
IF EQUIPPED
Your vehicle may be equipped with t he Cruise Control
system, or the Adaptive Cruise Control (ACC) system:
Cruise Control will keep your vehicle at a constant
preset speed.
Adaptive Cruise Control (ACC) will adjust the vehicle
speed up to the preset speed to maintain a distance
with the vehicle ahead.
NOTE:
In vehicles equipped with ACC, if ACC is not enabled,
Fixed Speed Cruise Control will not detect vehicles
directly ahead of you. Always be aware of the fea-
ture selected.
Only one Cruise Control feature can operate at a
time. For example, if Fixed Speed Cruise Control is
enabled, Adaptive Cruise Control will be unavailable,
and vice versa.
CRUISE CONTROL
When engaged, the Cruise Control takes over accelera-
tor operations at speeds greater than 20 mph
(32 km/h).
The Cruise Cont rol buttons are located on the right side
of the steering wheel.
WARNING!
Cruise Control can be dangerous where the system
cannot maintain a constant speed. Your vehicle could
go too fast for the conditions, and you could lose con-
trol and have an accident. Do not use Cruise Control
in heavy traffic or on roads that are winding, icy,
snow-covered or slippery.
Cruise Control Buttons
1 SET (+)/Accel
2 CANC/Cancel
3 SET (-)/Decel
4 On/Off
5 RES/Resume
STARTING AND OPERATING 171
4
Loading ...
Loading ...
Loading ...