User Manual - Page 125

For 2024 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
INSTRUMENT CLUSTER
DESCRIPTIONS PHEV ONLY
1. Tachometer
Indicates the engine speed in revolutions per
minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer
pointer in the red area. Engine damage will occur.
2. Engine Coolant Temperature
This gauge shows the engine coolant tempera-
ture. The gauge pointer will likely show higher
temperatures when driving in hot weather, up
mountain grades, or in heavy stop and go traf-
fic. If the red Warning Light turns on while driv -
ing, safely bring the vehicle to a stop, and turn
off the engine. DO NOT operate the vehicle until
the cause i s corrected.
WARNING!
A hot engine cooling system is dangerous. You or oth-
ers could be badly burned by steam or boili ng cool-
ant. It is recommended to call an au thor ized dealer
for service if your vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could dam-
age your vehicle. If the temperature gauge reads “H”
pull over and stop the vehicle. Idle the vehicle with
the air cond it io ner turned off until the pointer drops
back into the normal range. If the pointer remains on
the “H”, tur n the engine off immediately and call an
authorized dealer for service.
3. Instrument Cluster Display
The instrument cluster display features a driver
interactive display. When the appropriate condi-
tions exist, this display shows messages
page 124.
4. Fuel Gauge
The pointer shows the level of fuel in the fuel tank
when the ignitio n is in the ON/RUN position.
The fuel pump symbol points to the
side of the vehicle where the fuel
door is lo cated.
5. Power/Charge Gauge
This gauge repres ents the source of the power
utilized to accelerate the vehicle. The green
outer ring represents the High Voltage (HV) bat-
tery output during acceleration, and input power
during regeneration. The yellow inner ring repre-
sents the engi ne output power.
GETTING TO KNOW YOUR INSTRUMENT PANEL 123
3
Loading ...
Loading ...
Loading ...