Loading ...
Loading ...
Loading ...
TECHNICAL SPECIFICATIONS
VEHICLE IDENTIFICATION NUMBER (VIN)
The VIN is found on the lef t front corner of the A-pillar,
visible from outside of the vehicle through the
windshield.
NOTE:
It is illegal to remove or alter the VIN plate.
BRAKE SYSTEM
Your vehicle is equipped with dual hydraulic brake sys-
tems. If either of the two hydraulic systems lose normal
capability, the remaining system will still function. How-
ever, there will be some loss of overall braking effective-
ness. You may notice increased pedal travel during
application, greater pedal force required to slow or stop,
and potential activation of the Brake Warning Light.
In the event power assist is lost for any reason (i.e.,
repeated brake applications with the engine off) the
brakes will still function. However, the effort required to
brake the vehicle will be much greater than that
required with the power system operating.
WHEEL AND TIRE TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure
that the whee l is properly mounted to the vehicle. Any
time a wheel has been removed and reinstalled on the
vehicle, the lug nuts/bolts should be torqued using a
properly calibrated torque wrench using a six-sided
(hex) deep wall socket.
TORQUE SPECIFICATIONS
Lug Nut/Bolt
Torque
**Lug Nut/Bolt
Size
Lug Nut/Bolt
Socket Size
130 ft-lb
(176 N·m)
M14 x 1.50 22 mm
**Use only authorize d dealer recomme nde d lug nuts/
bolts and clean or remove any dirt or oil before
tightening.
Inspect the whee l mounting surface prior to mounting
the tire and remove any corrosion or loose partic les.
Spare Tire Torque Specifications
Lug Nut/Bolt
Torque
**Lug Nut/Bolt
Size
Lug Nut/Bolt
Socket Size
59 ft-lb
(80 N·m)
M14x1.50 22mm
**Use only authorize d dealer recomme nde d lug nuts/
bolts and clean or remove any dirt or oil before
tightening.
Spare tire torque is for the spare tire, located on the
swing gate.
Tighten the lug nut s/bolts in a star pattern until each
nut/bolt has been tightened twice. Ensure that the
socket is fully engaged on the lug nut/bolt (do not
insert it halfway).
Vehicle Identification Number
Wheel Mounting Surface
342
Loading ...
Loading ...
Loading ...