Loading ...
Loading ...
Loading ...
4
2. The password can not contain user name.
3. After activation, you can set security questions and email for password recovery (skip if not
needed). Click Forget Password on login page and follow pop-up instructions to complete
operation. Note that when resetting the admin password, the device and the PC must
belong to the same IP address segment of the same LAN.
4. Click OK to save the password.
5. Change the device IP to the same sub net with your computer by either modify the IP
address manually or check the checkbox of Enable DHCP.
6. Enter the password to activate your IP address modification.
1.1.2 Login
After you activate the device and and get the IP address, you can access the device via web
browser.
Steps:
1. Open the web browser and enter the IP address of the device in the address bar, e.g.,
192.168.1.64, and then press the Enter key to enter the login interface.
2. Select the language on the top-right of login interface.
3. Enter the user name and password,and click Login.
Note: When you are entering password, you can click to show password.
1.2 Installing the plug-in
Certain operation system and web browser may restrict the display and operation of the camera
function. You should install plug-in or complete certain settings to ensure normal display and
operation.
Operation
System
Web Browser
Operation
Loading ...
Loading ...
Loading ...