Loading ...
Loading ...
Loading ...
23
4. Enter the EAPOL version. The EAPOL version must be identical with that of the router or the
switch.
5. Enter the user name and password to access the server.
6. If you set the protocol to EAP-TLS, you should enter the identify, private key password,
upload the CA certificate, user certificate and private key.
7. Click Save to save the settings.
QoS
QoS (Quality of Service) can help solve the network delay and network congestion by configuring
the priority of data sending.
1. Click Qos tab to enter the Qos configuration interface.
2. Configure the QoS settings, including video/audio DSCP, event/alarm DSCP and Management
DSCP.The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the higher the
priority is.
3. Click Save to save the settings.
Email
Email function can be configured to send an email notification to all designated receivers if an
alarm event is detected, e.g., motion detection event, video loss, video tampering, etc.
Please configure the DNS Server settings on TCP/IP interface before using the Email function.
Note: The email function varies according to camera models.
1. Click Email tab to enter the email configuration interface.
2. Configure the required information, including sender, sender's address, SMTP server, SMTP
port, E-mail Encryption, attached image, interval, authentication, receiver, receiver's address,
etc.
E-mail Encryption: None, SSL, and TLS are selectable. When you select SSL or TLS and disable
STARTTLS, e-mails will be sent after encrypted by SSL or TLS. The SMTP port should be set as
465 for this encryption method. When you select SSL or TLS and enable STARTTLS, emails will
be sent after encrypted by STARTTLS, and the SMTP port should be set as 25.
Note: If you want to use STARTTLS, make sure that the protocol is supported by your e-mail
server. If you check the Enable STARTTLS checkbox when the protocol is not supported by
your e-mail sever, your e-mail will not be encrypted.
Attached Image: Check the checkbox of Attached Image if you want to send emails with
attached alarm images.
Interval: It refers to the time between two actions of sending attached pictures.
Authentication: If your email server requires authentication, check this checkbox to use
authentication to log in to this server and enter the login user name and password.
3. Click Save to save the settings.
Loading ...
Loading ...
Loading ...