Loading ...
Loading ...
Loading ...
47
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value ranges from 1
to 100, and the higher the value is, the more easily the change of scene can trigger the
alarm.
4. Click Arming Schedule to set the arming schedule.
5. Click Linkage Method to select the linkage methods.
6. Click Save to save the settings.
5.6.14 Face Detection
Note:
The function is only supported by certain camera models.
Purpose:
Face detection function detects the face appears in the surveillance scene, and some certain
actions can be taken when the alarm is triggered.
Steps:
1. Enter the Face Detection settings interface.
2. Check the Enable Face Detection checkbox to enable the function.
3. Check the checkbox of Enable Dynamic Analysis for Face Detection, and then the detected
face is marked with green rectangle on the live video.
Note: To mark the detected face on the live video, go to Configuration> Local and enable the
Rules.
4. Click-and-drag the slider to set the detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
5. Click Arming Schedule to set the arming schedule.
6. Click Linkage Method to select the linkage methods for face detection.
7. Click Save to save the settings.
5.6.15 Line Crossing Detection
Note:
The function is only supported by certain camera models.
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Line Crossing Detection settings interface.
2. Check the Enable checkbox of Line Crossing Detection to enable the function.
3. Select the line from the drop-down list for detection settings.
4. Set up the rules for the selected line.
1
．
Click the Draw Area button,and a virtual line is displayed on the live image.
2
．
Drag the line, and you can locate it on the live video as desired. Click on the line, two red
Loading ...
Loading ...
Loading ...