Loading ...
Loading ...
Loading ...
26
For Android For iOS
Then add the device to you app account, follow the prompts to create a device password to
activate the device, enable the P2P function and create a code stream encryption verification
code, step by step until the device is added successfully.
HTTPS
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks.
E.g: If you set the port number as 443 and the IP address is 192.168.1.64, you may access the
device by inputting https://192.168.1.64:443 via the web browser.
Note:
For the camera that supports plug-in free live view, when you use HTTPS to visit the camera,
you should enable Websockets for live view. Go to Configuration > Network > Advanced
Settings > Network Service.
HTTPS is enabled by default. The camera creates an unsigned certificate automatically.
When you visit the camera via HTTPS, the web browser will send a notification about the
certificate issue. Install a signed-certificate to the camera to cancel the notification.
1. Enter the HTTPS settings interface.
2. Check the checkbox of Enable to enable the HTTPS function.
3. Check the checkbox of Enable HTTPS Browsing to access the camera only via HTTPS
protocol.
4. Select the server certificate.
5. Click Save to save the settings.
Note: If the function is abnormal, check if the selected certificate is abnormal in Certificate
Management.
Integration Protocol
If you need to access to the camera through the third party platform, you can enable CGI
function or Onvif protocol. And if you need to access to the device through Open Network Video
Interface protocol(Onvif), you can configure Open Network Video Interface user in this interface.
Refer to Open Network Video Interface standard for detailed configuration rules.
CGI
Check the Enable ***CGI checkbox and then select the authentication from the drop-down list.
Then you can access to the camera through the third party platform.
Open Network Video Interface
1. Check the Enable Open Network Video Interface checkbox to enable the function.
Loading ...
Loading ...
Loading ...