Loading ...
Loading ...
Loading ...
28
Enhanced SDK Service: SDK over TLS protocol is used. If you enable Enhanced SDK Service, you
should select the server certificate. Communication between the device and the client software
is secured by using TLS (Transport Layer Security) protocol.
TLS (Transport Layer Security)
The device offers TLS 1.1 and TLS 1.2. Enable one or or more protocol versions according to your
need.
Smooth Streaming
Note: The function is only supported by certain camera models.
This function is used to view the live view smoothly via the client software or Web Browser when
the network is unstable or high quality of video is required.
Before you start:
Add the device to your client software and enable the NPQ protocol for live view via the client.
Steps:
1. Go to Network > Advanced Settings > Smooth Streaming page.
2. Select the Stream Type.
3. Check Enable Smooth Streaming.
4. Select the mode of smooth streaming. There are four modes selectable: Auto, Resolution
Priority, Error Correction and Frame Rate Priority.
Auto: The resolution and bitrate will be adjusted automatically, the upper limits of which will not
exceed the values you set on Video page. Go to Configuration > Video/Audio > Video page, set
the Resolution and Max. Bitrate before you enable smooth streaming function.
Resolution Priority:The resolution stays the same as the set value in Video page, and the bitrate
will be adjusted automatically. Go to Configuration > Video/Audio > Video page, set the Max.
Bitrate before you enable smooth streaming function.
Frame Rate Priority:The frame rate stays the same when setting resolution, bitrate,quality and
other parameters in Video page.
Error Correction: The resolution and bitrate stay the same as the set values in Video page. This
mode is used to correct the data error during transmission. You can configure the error
correction proportion within range of 0-100. When the proportion is 0, the data error will be
corrected by data retransmission. When the proportion is higher than 0, the error data will be
recovered via redundant data that is added to the stream. The higher the value is, the more
redundant date will be generated, and the larger bandwidth is required. When the proportion is
100, the redundant data will be as large as the original data.
Note: Be sure the bandwidth is sufficient in Error Correction mode.
5. Click Save to save the settings.
SRTP
Note: The function is only supported by certain camera models.
Steps:
1. Select the server certificate.
2. Select the encrypted algorithm.
3. Click Save.
Loading ...
Loading ...
Loading ...