Loading ...
Loading ...
Loading ...
42
1. Enter the video tampering Settings interface.
2. Check the Enable checkbox to enable the video tampering detection.
3. Go to Area Settings and click Draw Area to draw a detection area.
4. Click Stop Drawing to finish area drawing.
5. (Optional) Click Clear All to clear all of the areas.
6. Move the slider to set the sensitivity.
7. Click Arming Schedule to enter the arming schedule interface.
8. Click on the time bar and drag the mouse to select the time period.Click delete or delete
all to delete the configured schedule.
9. Move the mouse to the end of each day, a copy dialogue box pops up, and you can copy
the current settings to other days.
10. Click Save to save the settings.
11. Go to Linkage Method and check the checkbox to select the linkage method.
12. Click Save to save the settings.
5.6.3 Alarm Input
Note:
The function is only supported by certain camera models.
Purpose:
It detects the alarm input and take response actions when the alarm is triggered.
Steps:
1. Enter the Alarm Input Settings interface.
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally
Open) and NC (Normally Closed). Edit the name to set a name for the alarm input
(optional).
3. Click Arming Schedule to set the arming schedule for the alarm input.
4. Click Linkage Method and check the checkbox to select the linkage methods.
5. You can copy your settings to other alarm inputs.
6. Click Save to save the settings.
5.6.4 Alarm Output
Purpose:
It detects the alarm output and take response actions when the alarm is triggered.
Steps:
1. Enter the Alarm Output Settings interfaces.
2. Select one alarm output channel in the Alarm Output drop-down list. You can also set a
name for the alarm output (optional).
3. The Delay time can be set to 1s, 5s, 10s, 30s, 1min, 2min, 5min, 10min or Manual. The delay
time refers to the time duration that the alarm output remains in effect after alarm occurs.
Loading ...
Loading ...
Loading ...