Loading ...
Loading ...
Loading ...
27
2. Click Add to add a new Open Network Video Interface user. Set the user name and password,
and confirm the password. You can set the user as media user, operator, and administrator.
3. Click Modify to modify the information of the added Open Network Video Interface user.
4. Click Delete to delete the selected Open Network Video Interface user.
5. Save the settings.
Note: User settings of Open Network Video Interface are cleared when you restore the camera.
Alarm Sever
Alarm information can be sent to destination IP or Host via HTTP or HTTPS or ISUP protocol.
Notes:
The function may not be supported by certain camera models.
HTTP data transmission should be supported by the destination IP or Host.
Steps:
1. Input destination IP or host name, URL, and port number and select protocol.
2. Click Test to see if the service is available.
3. Click Default to reset the destination IP or host name.
4. Click Save to save the settings.
Network Service
In Network Service, you can control the use of the listed protocols and services the device offers.
You are recommended to disable unused protocol or service for network safety concern.
Note: Supported protocols vary according to camera models.
WebSocket and WebSockets
WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its
above version or Mozilla Firefox 52 and its above version to visit your camera. Otherwise, live
view, image capture, and digital zoom function can not be used.
If the camera uses HTTP, enable WebSocket.
If the camera uses HTTPS, enable WebSockets and select the server certificate.
SDK Service and Enhanced SDK Service
If you want to add the device to the client software, you should enable SDK Service or Enhanced
SDK Service.
SDK Service: SDK protocol is used.
Loading ...
Loading ...
Loading ...