Loading ...
Loading ...
Loading ...
41
Steps:
1. Draw the detection area as in the normal configuration mode. The supported area varies
according to the different camera models.
2. Select OFF for Scheduled Image Settings.
3. Select the area by clicking the area No.
4. Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area.
5. Set the arming schedule and linkage method as in the normal configuration mode.
6. Click Save to save the settings.
Scheduled Image Settings: Auto-Switch
Steps:
1. Draw the detection area as in the normal configuration mode. The supported area varies
according to the different camera models.
2. Select Auto-Switch for Scheduled Image Settings.
3. Select the area by clicking the area No.
4. Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area in the daytime.
5. Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area at night.
6. Set the arming schedule and linkage method as in the normal configuration mode.
7. Click Save to save the settings.
Scheduled Image Settings: Scheduled-Switch
Steps:
1. Draw the detection area as in the normal configuration mode. The supported area varies
according to the different camera models.
2. Select Scheduled-Switch for Scheduled Image Settings.
3. Select the start time and the end time for the switch timing.
4. Select the area by clicking the area No.
5. Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area in the daytime.
6. Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area at night.
7. Set the arming schedule and linkage method as in the normal configuration mode.
8. Click Save to save the settings.
5.6.2 Video Tampering
Purpose:
It detects if the lens is covered and take response actions when the alarm is triggered.
Note:
The function is only supported by certain camera models.
Steps:
Loading ...
Loading ...
Loading ...