Loading ...
Loading ...
Loading ...
e. Hold the converter with the installed 2.5-inch storage drive so that the connectors face toward the
rear of the bracket and the circuit board
2 faces upward. Then, flex sides of the bracket and align
pins
1 on the bracket with the corresponding holes in the converter.
Note: Do not touch the circuit board
2 of the storage drive.
Figure 57. Installing the converter into the bracket
f. Slide the bracket together with the installed storage drive into the storage drive bay until the bracket
snaps into position.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 135.
Front fan assembly
Attention: Do not open your computer or attempt any repair before reading and understanding the “Read
this first: Important safety information” on page iii.
CAUTION:
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury,
seek medical care immediately.
To remove or install a front fan assembly, do the following:
1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 59.
2. Locate the front fan assembly. See “Computer components” on page 7.
Chapter 7. Hardware removal and installation 87
Loading ...
Loading ...
Loading ...