Loading ...
Loading ...
Loading ...
c. Note the orientation of the connector on the new storage drive. Then, flex both sides of the adapter
and align the four pins
1 with the corresponding holes in the storage drive.
Note: Do not touch the circuit board (if accessible) of the 2.5-inch storage drive.
Figure 55. Installing the storage drive into the adapter
d. Align the four tabs on the adapter with the corresponding notches 1 in the converter. Then, slide the
storage drive as shown until the tab
2 snaps into position. The adapter with the storage drive is
installed into the converter.
Figure 56. Installing the adapter into the converter
86 P920 User Guide
Loading ...
Loading ...
Loading ...