Loading ...
Loading ...
Loading ...
b. Hold the new M.2 solid-state drive by its edges and ensure that the circuit board side is facing
upward. Insert the drive into the corresponding slot until it is firmly secured.
Notes:
• Pay attention to the direction of the notch
1 in the new drive.
• Do not touch the circuit board of the M.2 solid-state drive.
• If only one M.2 solid-state drive is installed on the M.2 solid-state drive holder, ensure that the
drive is installed in the M.2 solid-state drive slot 1 (
20 ). See “Parts on the system board” on page
8.
Figure 72. Installing the M.2 solid-state drive
c. Tighten the screw to secure the new M.2 solid-state drive.
Note: Do not overtighten the screw.
Figure 73. Securing the M.2 solid-state drive
8. To install the M.2 solid-state drive heat sink, do the following:
a. If necessary, remove the film that protects the thermal pad on the heat sink.
96
P920 User Guide
Loading ...
Loading ...
Loading ...