Loading ...
Loading ...
Loading ...
8
last cycle (or the last time the product was powered). During
this waiting time, the display will show the following feedback
“WATER IS TOO HOT: WAIT UNTIL THE TEMPERATURE
DECREASES”.
The jug must be at least 2 liters large.
» STEP 1 OF 8: DESCALING ~120 MIN.
When display will ask you to prepare the descaling
solution, proceed adding 3 sachets (corresponding to
75g) of the specific Oven WPRO* descaler in 1,7 liters
of drinking water at ambient temperature.
1 + +2
= 75 g
1,7 Liters
3
Once the descaling solution is poured inside the drawer,
press
to start the main descaling process.
The descaling steps do not need you to stay in front of
the appliance. After each step is completed, an
acoustical feedback will be played and the display will
show instructions to proceed with the next one.
» STEP 2 OF 8: DRAINING (up to 3 min.
When the display will show <PLACE A CONTAINER
BELOW THE WATER DRAINING HOLE
>, please proceed
with the draining task as described in the dedicated
Drain paragraph.
» STEP 3 OF 8: RINSING (~20 min.)
To clean the tank and the steam circuit, rinse cycle
has to be done.
When the display shows <REFILL THE TANK>, please
pour drinking water in the drawer, until the display
shows <TANK REFILLED>, then press
to start
the first rinsing.
STEP 4 OF 8: DRAINING up to 3 min.
» STEP 5 OF 8: RINSING ~20 min.
» STEP 6 OF 8: DRAINING (up to 3 min.
» STEP 7 OF 8: RINSING ~20 min.
» STEP 8 OF 8: DRAINING (up to 3 min.
After the last draining operation press
to
complete the descale.
When Descale procedure is completed, it will be
possible to use all the steam functions.
*WPRO descaler is the suggested professional product for the
maintenance of the best performance of your steam function
in the oven. Please follow the instructions for use on the
packaging. For orders and information contact the after sales
service or www.hotpoint .eu
Hotpoint-Ariston will not be held responsible for any damage
caused by the use of other cleaning products available on the
market.
MUTE
Tap the icon to mute or unmute all the sounds and
alarms.
CONTROL LOCK
The “Control Lock” enables you to lock the buttons on
the touch pad so they cannot be pressed accidently.
To activate the lock:
• Tap the
icon.
To deactivate the lock:
• Tap the display.
• Swipe up on the message shown.
MORE MODES
For selecting Sabbath mode and accessing Power
Management.
PREFERENCES
For changing several oven settings.
WI-FI
For changing settings or conguring a new home network.
INFO
For switching o “Store Demo Mode”, resetting the
product and obtaining further information about the
product.
Loading ...
Loading ...
Loading ...