Loading ...
Loading ...
Loading ...
WHEELS AND TYRES
* Option/accessory.
517
IMPORTANT
Risk of overheating. The compressor must not
run for more than 10 minutes.
5. Inflate the tyre to the pressure specified on
the tyre pressure label on the driver side door
pillar. Release air using the pressure reduc-
ing valve if the tyre pressure is too high.
6. Switch off the compressor. Detach the air
hose and the electrical cable.
7. Refit the dust cap on the tyre.
NOTE
•
After a tyre has been inflated, always refit
the dust cap in order to avoid damage to
the valve from gravel, dirt, etc.
•
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
Related information
•
Emergency puncture repair kit (p. 512)
•
Approved tyre pressures (p. 595)
When changing wheels
The car's wheels can be changed, e.g. to winter
wheels or a spare wheel.
Follow the relevant instructions for removing and
fitting wheels.
When changing to another tyre
dimension
Check that the tyre dimension is approved for
use on the car.
Contact an authorised Volvo workshop for updat-
ing the software at each change of tyre dimen-
sion. A software download may be necessary
both when changing to larger and smaller dimen-
sions, and also when switching between summer
and winter wheels.
Related information
•
Removing a wheel (p. 518)
•
Fitting the wheels (p. 519)
•
Approved wheel and tyre sizes (p. 593)
•
Tool kit (p. 522)
•
Winter wheels (p. 521)
•
Spare wheel* (p. 520)
•
Wheel bolts (p. 520)
Loading ...
Loading ...
Loading ...